Valgustehnika

Luminex – Single Mode fiber transceiver.
Transform any SFP cage into a fiber compatible connector for long distance solutions up to 10km.

– Rear-lit 72-digit (2lines of 36) LCD screen for the display of playback configuration – 12 completely configurable scene control faders – 36 keys for direct access to Playbacks – Power supply directly from main board

– 7” color TFT Touch Screen color
Display 800×480 pixel for a powerful
intuitive grafics interface
– 2 Rear-lit 72-digit (2 lines of 36)
LCD screen for the display of fader
configuration
– 12 keys for direct access to playback
and programming functions
– 12 faders with individual keys playback
freely programmableas master/group
master/manual cue
– 24 keys for direct access to playback
registers
– 4 encoder wheels for controlling
attributes during programming and
control of effects during playback
– Jog Ball for PAN and TILT control with
“locks” and “fine” buttons
– Grand Master fader + DBO key
– New round keys fine control
– Internal SD memory

The MagicQ Maxi Wing is an extremely powerful USB control wing for connecting to your PC or Mac to control lighting, video and LED
with the MagicQ PC software. MagicQ PC software runs under Windows, Linux or OSX. MagicQ PC software is free and uniquely the
outputs are fully enabled, allowing you to run shows on up to 32 Universes.
The MagicQ Maxi Wing enables advanced show programming and playback through real faders, buttons and encoder wheels. The
MagicQ Maxi Wing wing enables easy access to moving light parameters via the 8 rotary encoders, and live show control through
the 10 playback faders and cue stack control buttons. In additional there are 4 fully patchable direct DMX outputs on the rear panel.
MagicQ is simple and easy to program, enabling really quick setup – you can be up and running your show in seconds. With
unrivalled live editing and live timing options, impressive changes can be made live at the touch of a button – no need to spend hours
programming complex effects.
The MagicQ PC software is the same software that MagicQ consoles run – enabling familiar and flexible GUI lighting control, media
server connectivity options and in-built media server for LED grid arrays. And with the ability to transfer your show to other MagicQ
consoles over the network or using standard USB memory sticks the MagicQ PC Maxi Wing can be used as a powerful off-line show
editor or back-up system.
The MagicQ Maxi Wing provides an immensely powerful control PC based console in a compact size. Ideal for use by touring Lighting
Designers, or for installing into theatres, clubs, and venues, the Maxi Wing is the PC solution of choice for controlling lighting, video and
LED

The SDC-6 is a small battery operated 6-channel DMX controller. It is very suitable for easy applications such as exhibitions, small shops as well for testing of your DMX equipment.

• 6 individual Channel Fader
• 1 Master Fader
• 6 DMX Channels (1 to 6)
• Compact Design & Simple Operation

Wolfmix W1 is a standalone performance DMX lighting controller – designed for creating light shows on the fly without a computer. A toolbox of FX modules, music sync, and up to 4 DMX universes – packed inside robust hardware with a powerful processor. Choose from 1000’s of light fixtures, or build your own directly inside the controller. Whether it’s for a live performance, disco, club or show – Wolfmix has you covered.

The Blackbox R-512 G6 is a simple and reliable RDM and Wi-Fi receiver. This allows you to create a solid wireless connection up to a distance of 700 metres (2200 ft). You can receive up to 512 DMX channels with it. In addition, it can be used in combination with previous generations, such as the G3, G4, G4S and G5. If you want to connect the Blackbox R-512 G6 to a Lumens Radio CRMX transmitter, you can opt for the optional CRMX upgrade for R-512 G6. This makes this receiver box the first in the world to work with more than two million wireless DMX units.
The Blackbox R-512 G6 is an advanced device, yet very easy to control with just one button and status indication LEDs. You can also easily perform updates via Bluetooth using the W-DMX Configurator app. The aluminium housing has a built-in M10 clamp mount and hole with which it can be securely attached with hook and loop and an extra security thread.

The Blackbox F-1 G6 is a simple and reliable RDM and Wi-Fi transmitter and receiver. This allows you to create a solid wireless connection up to a distance of 700 metres (2200 ft). You can send / receive up to 512 DMX channels with it. In addition, it can be used in combination with previous generations, such as the G3, G4, G4S and G5. If you want to connect the Blackbox F1 G6 to a Lumens Radio CRMX transmitter, you can opt for the optional CRMX upgrade for F1 G6. This makes this receiver box the first in the world to work with more than two million wireless DMX units.
The Blackbox F-1 G6 is an advanced device, yet very easy to control with just one button and status indication LEDs. You can also easily perform updates via Bluetooth using the W-DMX Configurator app. The aluminium housing has a built-in M10 clamp mount and hole with which it can be securely attached with hook and loop and an extra security thread.

The MagicDMX Full USB to DMX Interface offers a full universe of DMX control with RDM support and without any time limit. It has the option of being used either as Output, or as an Input enabling use for monitoring DMX. Remotely set DMX addresses, select fixture modes and auto patch RDM compliant fixtures to MagicQ.MagicDMX is an economic, single universe USB to DMX interface in two versions, Basic and Full. It is designed to be used with the free MagicQ software as a way to practice programming and demo the MagicQ software using actual moving lights.; Output or input one universe of DMX – not time limited. Can be used as a DMX test device.

• One Universe DMX output
• 5 pin female XLR
• USB-C connector
• Basic electrical protection
• LED status indicator

The Swisson XSR series are reliable DMX and RDM splitters and boosters that process DMX and RDM signals with a high level of reliability suitable for professional use.The XSR has a specially designed power supply which ensures safe operation even under harsh mains conditions. All ports are individually optically isolated and well protected against transient over voltages.
In the “DMX only” mode all non-DMX data is filtered out and a clean signal without RDM or other protocols is generated.
The XSR splitters are visible to RDM controllers. This gives the user an better overview of the installation and may help with troubleshooting.

• High level of reliability
• Boosts DMX & RDM
• Regenerates DMX & RDM
• Reduces reflection problems
• Distributes DMX & RDM
• Optical isolation on each individual port
• Connection types: 5-pin and 3-pin XLR models
• RJ-45 and pluggable screw terminals models
• Housing types: Installation, box, rack and double rack models
• 5 DMX outputs per universe (10 outputs on double rack models)
• Built-in line termination

XND-4 and XND-8 nodes are user friendly sACN and Art-Net to DMX converter supporting the distribution of up to eight universes of DMX via individually optically isolated DMX ports, each configurable as input or output. Since most major lighting consoles are capable of transmitting Art-Net data, an XND node is all you need in order to take advantage of your console’s networking capability, allowing you to transmit a vast number of universes over one single network cable. In some cases, users may profit from already existing networking infrastructure.
Furthermore, the XND-4 or XND-8 is also perfectly suited to send DMX data to your fixtures from a computer or even from a mobile device. Many light controller programs for PC or Mac support Art-Net output natively and with the help of XND’s DHCP capability, you can even let your workplace network infrastructure do the network configuration of your XND automatically for you.
With its 128×64 pixels OLED display however, configuring the network and setting up your Art-Net or sACN preferences manually is no trouble at all and helpful status information is always at hand.
If two controllers send data to the same universe, XND-4 and XND-8 nodes automatically merge the DMX data, which makes the integration of a second lighting controller straightforward and may prove helpful for fixture testing during the setup of an installation.

• Art-Net and sACN to DMX converter for up to 8 independent universes
• Supports Art-Net 1 through 4 (DMX and RDM)
• Supports sACN
• Up to 8 individually optically isolated DMX ports, each configurable as input or output
• Graphic display and encoder knob for easy configuration and precise status information
• Quick access button for each DMX output port for quick selection of Art-Net or sACN universe
• Neutrik powerCON input and output
• Universal power supply

AsteraBox and its successor AsteraBox WIFI serve as interfaces between lights and controllers.
AsteraBox functions as a Bluetooth Bridge that connects lights with phones or tablets and enables AsteraApp control. Thanks to the built-in battery, it can be carried around to ensure that it stays close to your handheld device. While the classic AsteraBox connects via Bluetooth, the newer version also supports Wifi when connecting box to phone or tablet.
In addition, both AsteraBox models can be used as wireless DMX transmitters using LumenRadio’s industry-leading CRMX technology. This way you can control Astera lights as well as other CRMX-enabled lights from a DMX controller.

The XRC-200 is an easy to use DXM recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals.
The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time.
With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically.
The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device.
The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.

• Record and play back 64 Sequences
• 10 Configurable play lists
• Configurable fade times
• Optional 15 Control Inputs
• 2 DMX Inputs
• 2 DMX Outputs
• Built in timer
• Backup device
• USB connection for firmware update, and PC software
• PC software for uploading, downloading and storage of shows