Tehke julgelt broneerimistellimus, vaatame selle üle ja võtame Teiega ise ühendust! Peida
Näitan 1–100 tulemust 102-st
Produces razor sharp beams from 116 lenses that rotate from a high output white LED source that fill a dance floor, ceiling or wall Beams of light slowly rotate 360 degrees (continuous rotation – not sound active) Beam Angle: 270 degrees Low heat output Runs extremely cool! – NO Duty Cycles! – Run all night!…
Push gives you independence from your computer so you can be fully in the moment with your music. Connect your gear. Sculpt your sound. Play in a style that’s recognizably yours. An upgradeable instrument and an ever-evolving bond with Ableton Live, Push is designed to sit at the heart of your setup for years to come.
Responsive MPE-enabled pads make Push an individually expressive instrument. Design multi-faceted sounds and perform them in your own style with the movement of your fingertips within each pad.
Push’s 64 XY-sensitive pads respond to the subtlest shifts in finger placement and pressure. Feel your way around the pads to fluidly change your sound in multiple ways as you play.
The APC40 is the link between human and computer that perfectly balances analytical parameter control with creative expression. This controller will give you ease when it comes to laser shows.
The AKAI APC40 is an amazing controller with easy key mapping. This plug-n-play device connects flawlessly with the Beyond and Quickshow software from Pangolin and allows you to have full and quick control over your laser performance. It has 16 knobs, each surrounded by a ring of LEDs. These LED rings make it easy to see your settings on dark stages, indicating the currently selected parameters’ values.
Highlight offers the AKAI APC40 MKI for dry or full production hire in Sydney, depending on your needs. You can even, hire the product for multiple days and get a really competitive price, plus we only charge you for the days that the item is being used and not for the transportation/setup dates.
12 channels of dimming or zero voltage switching Suitable for resistive and inductive loads above 100W 200 to 250 Vrms 1/2/3 phase star connection XLR and RJ45 DMX connectors on all models Rugged steel enclosures Optional front panel manual level controls on 6 channel models Dimming and switching selection per channel
TheAputure F10 Fresnel is the first Bowens Mount Fresnel on the market made to match the size of traditional 10-inch Fresnel lights like a tungsten 5K, with a 250mm diameter lens made of real glass. The size of this Fresnel allows filmmakers to get punchy hard-light that maintains a subtle soft quality that is perfect for dramatic expression.
As an Aputure Fresnel, this modifier also uses dual-lens optical design, utilizing a condenser lens to refocus the light from a flat-chip COB LED to optimize it for the front Fresnel element, further enhancing the fixture’s illuminance. When combined with the Aputure LS 600d Pro, the fixture can output over 29,300 lux at 3 meters.
To ergonomically and precisely adjust its variable 15°-45° beam angle, the F10 Fresnel uses Aputure’s helicoid focus design from the Fresnel 2X. The F10 also incorporates a ventilation design that prevents the COB from overheating, while also minimizing any light leaks.
The drop-in accessory slot is compatible with Aputure’s F10 Barn Doors, which provide 8 leaves made to properly cut light from the large Fresnel.
The Fresnel 2x design features dual optical intensifying elements, a large 5.5” front Fresnel lens, improved ventilation, and the elimination of light leaks, making this the ultimate Bowens Mount Fresnel.
DUAL LENS OPTICAL DESIGN
The rear lens focuses and magnifies the beam onto the larger 5.5” front Fresnel lens, maximizing light utilization. Our dual lens optical design makes the Fresnel 2X twice as powerful as the original Aputure Fresnel, and makes the 120d II almost 10 times brighter than with the reflector.
NEW ROTATING DESIGN
By utilizing a new rotating barrel design, the Fresnel 2X creates an intuitive user experience, similar to a camera lens. The smooth focus throw gives users an ability to accurately finesse the beam angle of their light source, allowing you to easily spot or flood your light with a simple twist.
VERSATILITY AND PORTABILITY
By utilizing a universal Bowens Mount, this fresnel can be attached to a myriad of lights. The 7” front ring also accepts the Aputure Barndoors, meaning your light shaping options are endless. With the included carrying case, the Fresnel 2X can easily follow you wherever your shoots may take yo
This spherical softbox can pop open and be ready to use in mere seconds. With the APUTURE Lantern, you can produce soft, even light wherever your shoots may take you.
EVEN, OMNIDIRECTIONAL LIGHT
By utilizing a 26” spherical design, the Lantern spreads the light from your LED or Studio Strobe in all directions with a 270° beam angle.
ART OF CONTROL
The Aputure Lantern is one of the only spherical softboxes on the market with a 4-section fully adjustable light control skirt. By using a hook-and-loop design, the removable skirts can attach in any position, to quickly and precisely control your soft light.
READY FOR RUN AND GUN
With its tension-based quick release frame, the Lantern can be set up or broken down in just a few seconds, allowing you to set up fewer lights, faster.
ANY BOWENS LIGHT
With the ability to fit onto any Bowens mount Studio Strobe or LED fixtures, such as our 120d or 300d series lights, the Lantern is the perfect photo or video accessory for casting soft light over a wide area, while still maintaining control.
The Light Dome 150‘s expansive 5 foot (150cm) transforms Bowens Mount point-source lights into a massive soft source, elegantly illuminating large spaces.
MULTIPLE DIFFUSIONS
Like other members of the Light Dome family, the Light Dome 150 includes two diffusion options (1.5 & 2.5 Stop), allowing you to adjust the density and quality of your soft light.
QUICK BUILD
Using Aputure’s pioneered quick-release setup design, the Light Dome 150 remains one of fastest modifiers on the market and can be assembled in seconds.
LIGHT CONTROL GRID
No Aputure soft light modifier would be complete without the ability to control the direction of the light source. The Light Dome 150 includes a 45° fabric light control grid to minimize excess spill light so you can achieve the perfect look.
PERFECTLY CIRCULAR
Following the Light Dome II, the Light Dome 150 utilizes a 32-sided design, resulting in one of the most perfectly round modifiers on the market, allowing for completely circular reflections.
UNIVERSAL ACCESSORY
The entire Light Dome lineup utilizes the most common lighting accessory mount in the world: the Bowens Mount. And the Light Dome 150 is no exception, allowing it to be used in conjunction with any Bowens Mount fixture including Aputure’s Light Storm product line, and works especially well with the output power of the LS 600 series.
Bundled with a fabric honeycomb grid add-on that helps control the light spill spread by 40 degrees, and suitable for portraits, head shots, interviews, and fashion, the 34.8″ Light Dome II from Aputure is a 16-sided modifier that offers quality of light options and wide compatibility with Aputure lights, as well as those of the many other manufacturers that use the popular Bowens front accessory mount. The structure of the Light Dome II is fortified by its 16 durable steel support rods, while its silver interior maximizes your light source’s output. Its 24″ depth produces a focused light with directional control that can be narrowed further for selective lighting with the included 40° fabric grid. Aputure provides a removable inner diffuser and both 1.5-stop and 2.5-stop front diffusers that you can use individually or all at once for softness and contrast options. The supplied gel filter holder also offers creative color options. Any way you use it, you’ll find that the Light Dome II renders soft, flattering light with a wraparound quality and produces round, natural-looking catchlights in the eyes of your subject.
Battery-powered LED puck.
he AX3 is a battery operated, easy to use IP65 RGBW puck aimed at stage lighting and corporate events. It can be used as uplight as well as hanging or standing spotlight and inside translucent objects, truss, etc. It is extremely compact and yet offers a high brightness paired with long battery runtime and range.
Light bulb for filmmakers and event professionals.
The first color-tunable LED bulb for professional film, stage and event productions. Not bigger than a normal LED bulb, it contains a CRMX receiver as well as RF and Bluetooth modules for the AsteraApp. It can be powered via lamp socket or with a standard power bank and thanks to its Titan LED engine it displays precise colors and white tones with ultra-high CRI and TLCI. Available in white and black.
The ultimate LED tube for film, studio, stage and events.
Titan Tube is the ultimate LED tube for filmmakers, studios, event technicians and any creative person. It emits powerful, tunable whites with ultra-high color rendering as well as colored light which can be applied to individual pixels or the whole tube. The tube offers unlimited range of usage; indoor or outdoor, AC-powered or on battery, on the go with the AsteraApp, with wired or wireless DMX.
AsteraBox and its successor AsteraBox WIFI serve as interfaces between lights and controllers.
AsteraBox functions as a Bluetooth Bridge that connects lights with phones or tablets and enables AsteraApp control. Thanks to the built-in battery, it can be carried around to ensure that it stays close to your handheld device. While the classic AsteraBox connects via Bluetooth, the newer version also supports Wifi when connecting box to phone or tablet.
In addition, both AsteraBox models can be used as wireless DMX transmitters using LumenRadio’s industry-leading CRMX technology. This way you can control Astera lights as well as other CRMX-enabled lights from a DMX controller.
Candy Light is a professional RGB LED multicolor lighting system that can be used for all SLIDE products with I3 and E3 base. It is Suitable for indoor and outdoor use and it is the perfect wireless lighting system. Remote control is included.
The MagicDMX Full USB to DMX Interface offers a full universe of DMX control with RDM support and without any time limit. It has the option of being used either as Output, or as an Input enabling use for monitoring DMX. Remotely set DMX addresses, select fixture modes and auto patch RDM compliant fixtures to MagicQ.MagicDMX is an economic, single universe USB to DMX interface in two versions, Basic and Full. It is designed to be used with the free MagicQ software as a way to practice programming and demo the MagicQ software using actual moving lights.; Output or input one universe of DMX – not time limited. Can be used as a DMX test device.
The MagicQ Maxi Wing is an extremely powerful USB control wing for connecting to your PC or Mac to control lighting, video and LED
with the MagicQ PC software. MagicQ PC software runs under Windows, Linux or OSX. MagicQ PC software is free and uniquely the
outputs are fully enabled, allowing you to run shows on up to 32 Universes.
The MagicQ Maxi Wing enables advanced show programming and playback through real faders, buttons and encoder wheels. The
MagicQ Maxi Wing wing enables easy access to moving light parameters via the 8 rotary encoders, and live show control through
the 10 playback faders and cue stack control buttons. In additional there are 4 fully patchable direct DMX outputs on the rear panel.
MagicQ is simple and easy to program, enabling really quick setup – you can be up and running your show in seconds. With
unrivalled live editing and live timing options, impressive changes can be made live at the touch of a button – no need to spend hours
programming complex effects.
The MagicQ PC software is the same software that MagicQ consoles run – enabling familiar and flexible GUI lighting control, media
server connectivity options and in-built media server for LED grid arrays. And with the ability to transfer your show to other MagicQ
consoles over the network or using standard USB memory sticks the MagicQ PC Maxi Wing can be used as a powerful off-line show
editor or back-up system.
The MagicQ Maxi Wing provides an immensely powerful control PC based console in a compact size. Ideal for use by touring Lighting
Designers, or for installing into theatres, clubs, and venues, the Maxi Wing is the PC solution of choice for controlling lighting, video and
LED
QuickQ Rack is a small rack mountable version of the QuickQ console designed for installations. It features the same operating system as QuickQ series consoles, but is designed to operate as a remote system without physical user control.
Featuring 10 playback/execute buttons on the unit, the QuickQ Rack is ideally paired with 10 Scene wall plates.
Supporting four universes QuickQ Rack is ideal for installations, control rooms and bars. The unit can be used as a desktop box or rack mounted with the supplied rack ears.
The Swisson XSR series are reliable DMX and RDM splitters and boosters that process DMX and RDM signals with a high level of reliability suitable for professional use.The XSR has a specially designed power supply which ensures safe operation even under harsh mains conditions. All ports are individually optically isolated and well protected against transient over voltages.
In the “DMX only” mode all non-DMX data is filtered out and a clean signal without RDM or other protocols is generated.
The XSR splitters are visible to RDM controllers. This gives the user an better overview of the installation and may help with troubleshooting.
The D-Split is an optically-isolated DMX splitter and repeater for DMX512. With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32
DMX fixtures.
Need more outputs? Simply add more D-Splits to your chain!
The small, light and portable D-Split offers a great solution to extend your DMX chain, without sacrificing the quality.
ANSI E1.11 – USITT DMX512-A compatible. Each unit repeats and re-buffers all 512 channels of DMX from the input on each output.
XND-4 and XND-8 nodes are user friendly sACN and Art-Net to DMX converter supporting the distribution of up to eight universes of DMX via individually optically isolated DMX ports, each configurable as input or output. Since most major lighting consoles are capable of transmitting Art-Net data, an XND node is all you need in order to take advantage of your console’s networking capability, allowing you to transmit a vast number of universes over one single network cable. In some cases, users may profit from already existing networking infrastructure.
Furthermore, the XND-4 or XND-8 is also perfectly suited to send DMX data to your fixtures from a computer or even from a mobile device. Many light controller programs for PC or Mac support Art-Net output natively and with the help of XND’s DHCP capability, you can even let your workplace network infrastructure do the network configuration of your XND automatically for you.
With its 128×64 pixels OLED display however, configuring the network and setting up your Art-Net or sACN preferences manually is no trouble at all and helpful status information is always at hand.
If two controllers send data to the same universe, XND-4 and XND-8 nodes automatically merge the DMX data, which makes the integration of a second lighting controller straightforward and may prove helpful for fixture testing during the setup of an installation.
Thanks to its rechargeable battery and QuickDMX equipment, this bar is completely wireless. Control the bar via DMX, use the pre-installed show programs in auto or music mode or use the included remote control. The battery provides enough power for up to 13 hours of operation.
LED Audience Blinder with PAR-36 Blinder housing with RGBW LEDs (4in1).
PRO outdoor spotlight (IP65) in case with 60 x 8 W 4in1 LED (RGBW).
Colorful party fun.
Amaze your guests with a Eurolite disco ball and its colorful light effects! This mirror ball has a diameter of 13 cm, rotates around its own axis with 5 rotations per minute and paints the room in red, green and blue lights.
Plug and play: The mirror ball does not require any preparation. All you have to do is plug it in, the rest works automatically. Thanks to the compact and lightweight design, you can take your new little LED disco with you wherever you go and place it in any location you like. The power adapter required for operation is, of course, included in the delivery.
DMX-Controlled mirror ball motorFor driving mirror balls up to a max. total weight of 40 kg. The max. load capacity always refers to the actual weight of the mirror ball incl. mirror ball chain, safety chain and fixing material.
This mega mirror ball in professional quality by Eurolite has a staggering diameter of 1 meter!
A mirror ball of this size is a true eye catcher in large clubs and at large events.
The robust plastic core is covered with countless small mirror facets and features a continuous shaft guaranteeing a high tensile strength. The mirror ball also includes two eyelets allowing for attaching both the fastening chain and the required fall protection.
Suitable motors, the required mounting material and a transport case are available as accessories.
Safety mirror ball with second eyelet.
No party without a disco ball! Its simple design and affordable price make the disco ball a popular decoration classic used to create fascinating plays of light on the dance floor. Eurolite offers a wide range of disco balls in different colors and sizes.
The models are available in 30 cm, 40 cm and 50 cm diameters and are covered with countless small mirrors (10 x 10 mm). The robust plastic core is covered with hundreds of small mirror facets and features a continuous shaft guaranteeing a high tensile strength. The mirror ball also includes two eyelets allowing for attaching both the fastening chain and the required fall protection.
An additional motor can be used optionally to make the mirror ball rotate automatically.
Suitable motors, the required mounting material and a transport case are available as accessories.
PAR-16 housing with GX-5.3 socket for 12 V MR-16 lamp.
Wireless DMX system 2.4 GHz.
Design base with E-27 socket.
The Showtec Eventlite Table WW is a compact 3.5 watt Warm White battery LED light with touch dimming function and USB-C charger, suited for indoor and temporary outdoor use. Its stylish cap prevents your audience and guests from getting blinded by its light output, while illuminating any table or bar. Without recharging, the battery lasts up to 16 hours and the Eventlite Table WW can be temporarily used outside due to its IP54 rating. The Eventlite Table WW fits in every setting with either a black, white and bronze housing.
The set contains 8 lights
Motorized DMX follow spot with cold white 1000 W LED, zoom & focus for long distances
Manual control via movable control panel with buttons and faders
Direct color temperature selection for 3 preset values
Color wheel; Iris stepless; frost filter; Zoom motor-driven; Focus motor-driven
Color wheel with 7 dichroic filters plus open half colors selectable
Dimmer electronic
Strobe effect
The device is cooled by cooling fan
Control via stand-alone; Master/slave function; DMX
With a beam angle of 2° – 7°
With Mounting bracket
Monochrome LCD display
Suitable for a range of use from 75 to 200 meters
For application areas such as: Wedding/gala/events; Stage; theater; Rental
Application possibility: On stand
Follow spot with cold white 600 W LED for long distances, zoom, DMX
Manual control via movable control panel with buttons and faders
1 powerful LED 600 W COB (chip-on-board) cold white (CW)
Focus manual; Iris stepless
The device is cooled by cooling fan
Control via DMX
With a beam angle of 7° – 13°
With Mounting bracket
LCD display
Direct color temperature selection for 3 preset values
Dimmer electronic
Strobe effect
Suitable for a range of use from 50 to 100 meters
Color wheel with 7 dichroic filters plus open half colors selectable
Preprogrammed in LED PC-Control 512; Light Captain
Built with SEETRONIC connector
For application areas such as: Wedding/gala/events; Stage; theater; Rental
Application possibility: On stand
GLOBO lampide minimaalne disain, sfääriline kuju ning pehme valgus, loovad maagilise ja meeldejääva atmosfääri.
Oma olemuselt on see elegantne, kaasaegne ja trendikas.
See laua- ja põrandalampide komplekt on valmistatud polüetüleenist.
Laos:
Ø 80 cm – 4 tk
Ø 60 cm – 9 tk
Ø 30 cm – 203 tk
Ø 20 cm – 10 tk
Innovative outdoor IP66 Beam moving head , MSD Platinum Flex 380 watt, Total Output (Lumen)120.000, 7200K, CRI 80Ra, beam angle 2°, variable focus with range from 5m to infinity, 2 prims,8-facet,16-facet controllable independently can produce 24 facet prism effect, frost filter, Fixed gobo wheel: 12 gobos + open, Color wheel: 14 colors + open, Control channels (DMX): 15/12/16, DMX-512 RDM, durable die casting aluminum, 24 kg.
The Infinity Furion B401 Beam. A versatile moving head with a powerful Osram Sirius HRI 230 W 7R as light source. Like the rest of the family the B401 has been equipped with extremely precise and fast motors which deliver the 4° beam every time. The Furion B401 is equipped with 17 metal gobos which create awesome effects by using the 2 prisms. The most interesting feature which truly defines the Furion B401 is the colour bump-wheel. The colour bump-wheel brings the total of dichroic filters up to 14 + white. With this quantity switching between different single colours or creating a vast amount of split colours or bump colours is very easy, tremendously quick and accurate. The 14 dichroic colours in the Furion B401 have no fixed positions which make them very flexible in generating the required colour in no time. Besides having the choice to be able to bump between colours, the amount of white visible in the beam can also be determined.
The Infinity iFX-640 is a 6x 40 watt RGBW effect Moving Head with Individual Pixel Control. This creative eye-candy lighting fixture is perfectly fit to create stunning effects with its 4 dimmer curves, an endlessly rotatable, bi-directional front lens to create prism beam effects, a diffraction filter that creates flower effects, beam diffusion blades for making a nice wash, and a strobe function.
With the iFX-640 you can create nice colours, from punchy saturates to smooth pastels and whites. It’s also possible to seamlessly transition from a narrow 5° beam to a wide 36° wash thanks to its motorised zoom. Furthermore, you can control the angle of the beam diffusion blades on a continuous scale. This allows you to create a frost effect that is precisely tailored to your scene. Controlling this fixture can be done manually and via DMX in either Manual and Auto-Run mode.
The Infinity iW-1941 RDM moving head wash light with a motorised zoom, creating a beam from 3.6° to 60°, produces a massive output due to the use of 19 RGBW 40 W Osram LEDs, while the silent fan ensures whisper-quiet operation. Individual pixels are controlled via DMX, Art-Net or RDM. Equipped with features like adjustable pan/tilt range, multiple dimming settings RGBW/CMY option, 0 – 20Hz strobe and various operating modes, the iW-1941 RDM is a formidable unit in any setup or situation. The iW-1941 RDM combines very fast movements, a wide zoom range and a powerful output to create spectacular light effects.
Very powerful strobe/wash combination fixture with a beam angle of 110 degrees. It has ten individually controllable sections with 42 RGBW LEDs each that deliver wash effects of up to 30,400 lumens when combined. The white part of the RGBW LEDs has a CRI of 92, which is very high for a product of this type.
The strobe effect is created by a row of 35 ultra-bright CW LEDs, each capable of strobing at 20 W for a total of 700 W of LED strobe power (over 70,000 lumens)! The strobe LEDs have a special lens to optimise the output angle. The LEDs are positioned in a line in the centre of the fixture in between the wash LEDs. They can be used in continuous output mode, but are tuned down to 12 W (over 54,200 lumens) in this mode for thermal reasons.
The LEDs are soldered onto a black PCB, so the strobes are inconspicuous when switched off. The cooling fans can be set to a slow mode to keep them whisper quiet. With the optional L bracket, the IP65-rated housing can be mounted vertically or at an angle, while still being balanced (no torque force on the mount). Other optional accessories include a top hat, a barndoor and a range of diffusers.
There are 3 pcs in the suitcase.
Weather-proof blinder with pixel control and atmo cluster
Weather-proof PAR spot, IP65, with warm white 100 W COB LED and motorized zoom
LEDVANCE ECO HP LED Flood 300W 857 N (60deg beam) Symmetric Beam, Rotational, 41100lm, 5700K daylight white, Black body, IP65, 50,000hrs (L70).
Floodlight with rotational symmetric light distribution for high mast area lighting. Direct replacement for luminaires using HID lamps. For outdoor use in sports facilities, industry, and lighting of large areas.
Energy savings of up to 90% compared to halogen lamp floodlights
– Energy savings of up to 45 % compared to luminaires that use conventional discharge lamps
– Homogeneous light output
– Mounting bracket for up to 180° tilting
Pre-installed, flexible 1 m cable (H05RN-F), wrapped 3 x 1.0 mm² single wires
OSRAM Ledvance floodlight LED 200w manufactured in black aluminium and tempered glass. Floodlight is characterized by its luminous efficacy of up to 110 lumen per watt, a shock resistance of IK08.
IP65 class protection.
18150 lumens of luminous flux.
LED SMD 200w in neutral white light (4000k).
Ledvance LED Floodlight Performance Black 180W 20000lm 100D – 865 Daylight | IP65 – Symmetrical.
The Ledvance LED Floodlight Performance Black 180W 20000lm 100D – 865 Daylight | IP65 – Symmetrical with its socket is characterized by a set of specifications. The colour temperature of 6500K – Daylight Kelvin makes it possible to create a nice and pleasant atmosphere, making it the right choice for your building! The colour code, 865 Daylight, does not only include the colour temperature, which has already been mentioned, but also the colour rendering, which is defined by the ability to make us distinguish all the colors of illuminated objects. The colour rendering of this product is 80-89 and therefore excellent for the usage of this product.
Bidirectional 4-universe node.
The LS-Node series is the new range of DMX/RDM streaming devices supporting ArtNet and sACN industry standards. They can handle from 1 to 4 DMX universes depending on the model: LS-Node1, LS-Node2 or LS-Node4, fully configurable via webserver. All LS-Node devices have an integrated two-port Ethernet switch and are multiprotocol. It can be used as Single Mode (converter from DMX to ArtNet/sACN), Merger Mode (mixing of two universes via ArtNet/sACN or DMX in HTP/LTP mode), Backup Mode: (switches between two connected consoles in case of failure of the main one with a maximum latency of 3 seconds). ¼ rack format (LS-AR-19 accessory available). Powered via USB-C or PoE.
MagicQ MQ250M Stadium combines a high capacity of show control with portability for a complete on-the-go console solution. MQ250M has the ability to control up to 128 universes without any additional processing equipment with the ready-to-go MagicQ software you are already familiar with. 10 backlit and motorised faders and 10 backlit playback encoders with executors give you a lot of programming real estate in the small frame MQ250M is designed in.
The MagicQ MQ500 Stadium is designed to operate at the highest level of show control, supporting up to 200 universes direct from the console without the need for external processing. MagicQ MQ500 Stadium is designed for high performance and complex shows. Its features allow shows to be designed from concept to reality, including lighting, media, and LEDs.
MQ500 Stadium features dual HD resolution multi touch 15” displays with adjustable viewing angle and multi touch gesture support. It has the largest number of playbacks in the ChamSys family, with 42 playbacks made up of both fader and executor playbacks for live busking. This includes 15 full faders, 15 executable playbacks, and a dedicated section of 12 multipurpose Macro/Execute/Playbacks/Palette keys. For additional control connect a MagicQ Stadium Wing and get even more playbacks and another touchscreen display as well.
The MQ500 Stadium has inbuilt MagicVis 3D visualiser with high quality beam and gobo rendering. This means you can preprogram a new song or create new effects offline, and save time onsite.
The MQ500 Stadium has 4 built-in DMX ports and inbuilt 4 port ethernet switch.
This versatile console also includes an intensity wheel and 100mm split crossfaders for theatre control.
The MagicQ MQ80 is an extremely powerful console in a small size, supporting 48 universes direct from the console and 4 DMX ports supporting RDM, but still fits with in checked luggage restrictions.
It has a large 12” high resolution display provides easy access to all MagicQ features including the Plot window where fixtures can be selected and focused graphically.
MagicQ MQ80 features the same software found on all MagicQ consoles, and uses the same show file formats, enabling compatibility between all MagicQ products. MagicQ MQ80 can be connected over network to a PC or Mac running the free ChamSys free MagicVis lighting visualisation software, or MagicHD media player software (for output of up to 8 layers of HD media) at no extra cost.
The construction of the MagicQ MQ80 incorporates high reliability components, including durable metal Neutrik locking connectors. The inbuilt 4 port Ethernet switch is protected by the UPS, thus ensuring that both the console and the network switch maintain operation even during a power loss.
The console features a Kensington security slot for securing the product. Both soft bags and flight cases are available as optional extras.
Manhattan on põrandalamp, mida iseloomustab ebakorrapärane ja silmatorkav kujund.
Tänu oma huvitavale disainile on antud lamp auhinnatud HA + D Award 2012 kategoorias Readers’ Choice Award for Product Innovation.
ightJockey 2™ is a flexible, easy-to-use Windows-based controller package that includes a Martin™ M-DMX USB Interface Box.
One of the industry’s most popular PC-based controllers for well over a decade, LightJockey 2™ offers lighting designers greater flexibility, spontaneity and ease of use in a user-focused control package. LightJockey™ software can be downloaded here
The Wizard Extreme is a 250 W discharge light with rapid movement, over 80 color and gobo beams and a shutter for rapid strobe effects.
Universaalne, must näpitsvalgusti E27 sokliga.
Sobilik dekoreerimiseks, ajutisteks installatsioonideks, töökoha või ruumi valgustamiseks.
Universaalne, must näpitslamp.
Kohtvalgusti, mis sobib maalide, töökohtade või muul moel rõhutamist vajavate detailide valgustamiseks.
Praktiline, must näpitslamp.
Kohtvalgusti, mis sobib iluteenindajate ja teiste töökohtade valgustamiseks.
MASCHINE lets you effortlessly produce beats, melodies, and harmonies with powerful drum synths, premium sounds, an integrated sampler, and more – cutting-edge software meets intuitive hardware for ultra-smooth workflow.
FL PFM 50 W/4000K SYM 100 WT.
DMX-pinspot with warm white 15 W LED, beam angles 4°/10°/25° (frost filter) Additional frost filter provides a wide, soft and homogeneous light 1 powerful LED 15 W high-power warm white (WW) The device is cooled by passive convection cooling Control via stand-alone; DMX; IR remote control; RDM Flicker-free Strobe effect With a beam angle of…
Pinspot with 15 W COB LED, beam angles 4°/6°/20° (frost filter)
Additional frost filter provides a wide, soft and homogeneous light
1 powerful LED 15 W high-power 4in1 QCL RGBW (homogenous color mix)
4 integrated show programs
The device is cooled by passive convection cooling
Control via stand-alone; DMX; IR remote control; Sound to light via Microphone; RDM; Master/slave function
Flicker-free
With a beam angle of 4°
With double bracket
OLED display
Color blend stepless; color change adjustable; color fade adjustable; Dimmer electronic; Dimmer speed (step response) adjustable
Strobe effect
Preprogrammed in Light´J; LED PC-Control 512; EASY SHOW 1; LED EASY OPERATOR 4×4; LED EASY OPERATOR 4×6; LED EASY OPERATOR DELUXE; Light Captain; EASY SHOW 2; EASY SHOW 3
Silent operation
Mains input and output for power linking up to 8 units
For application areas such as: Clubs/dancing school; Party room; mobile djs / entertainer; restaurants, bars and hotels
Application possibility: Standing; suspended; on stand
IP65 rated bar, suitable for wall or stage light washing.
18 LEDs, with independent control ability via DMX.
RGBWA colour mixing.
True Powercor and Seetronic connections for power and DMX.
No fans cooling system – passive aluminium cooling system .
Perfect for applications like Theater or TV.
The XES-2T6 is a six plus two port Gigabit Ethernet switch with two ports being aggregated to a high throughput, redundant trunk link. The six other ports are individually assignable to groups (IEEE 802.1Q VLANs) that may participate in completely independent networks that do not interfere with each other. Thanks to the graphic OLED display, the encoder knob and a push button for each of the six configurable ports, the switch is intuitive to setup and the configuration is done in next to no time.
The grouping and the redundant fast backbone link make the XES-2T6 an ideal solution for interconnecting the stage with the FOH for instance.
As a layer 2 switch, the XES-2T6 is generally unaware of the application and therefore it works well with any protocol that operates on top of TCP/IP and with many Ethernet based protocols. However, special precautions have been taken to ensure that the XES-2T6 works perfectly with Art-Net, sACN and Dante. The Art-Net specification for example expects the controller to only send data every few seconds or when an update is available. A typical switch might put itself into sleep mode when no traffic is observed, not so the XES-2T6; it stays ready to forward data anytime without delay.
With the increased acceptance of TCP/IP and Ethernet based protocols, the proper operation of the network and its equipment has become critical for many shows. Therefore, it is crucial to professionally plan, configure and install the network for any show or venue. As a measure to further lower the chances of network outages, the XES-2T6 comes equipped with two separate switch mode PSUs that can be powered from two different mains supplies.
Excellent LED luminaire for illuminating squares, large tents, or spaces from the center.
The luminaire has four rotatable LED panels that can be positioned at different angles.
4000K LED lights provide clear and sharp light, perfect for illuminating shops and other commercial spaces.
The luminaire’s dust and moisture resistance is IP65, making it suitable for outdoor use.
– 7” color TFT Touch Screen color
Display 800×480 pixel for a powerful
intuitive grafics interface
– 2 Rear-lit 72-digit (2 lines of 36)
LCD screen for the display of fader
configuration
– 12 keys for direct access to playback
and programming functions
– 12 faders with individual keys playback
freely programmableas master/group
master/manual cue
– 24 keys for direct access to playback
registers
– 4 encoder wheels for controlling
attributes during programming and
control of effects during playback
– Jog Ball for PAN and TILT control with
“locks” and “fine” buttons
– Grand Master fader + DBO key
– New round keys fine control
– Internal SD memory
– Rear-lit 72-digit (2lines of 36) LCD screen for the display of playback configuration – 12 completely configurable scene control faders – 36 keys for direct access to Playbacks – Power supply directly from main board
Studio 12 Scan Control is a reliable user-friendly lighting console, able to control 12
or 24 channels of dimmable fixtures, and 12 ‘intelligent’ units using up to 36 DMX
channels each.
Studio 12 Scan Control’s controls include:
Manual Presets (2 rows of 12 faders, which can be used as two 12-channel presets
or a single 24-channel preset);Registers (1 row of 12 faders which control the memory
registers);Light Chase controls (for programming and controlling chases); DMX Unit
controls (per controlling moving head fixtures, scanners, colour-changers, dimmers, and
any other equipment using DMX 512 protocol).Studio 12 Scan Control is an extremely
versatile lighting control console, ideal for a vast range of applications: from concerts to
theatres, clubs to television studios, from small to large show events.
Studio 12 is a reliable use-friendly lighting console, able to control 12 or 24
channels of dimmable fixtures.
Studio 12 is an extremely versatile lighting control console, suited to a vast range of applications:
from concerts to theatres, clubs to television studios, from small to large show events.
Kompaktne ja võimekas 100W LED dioodiga BEAM tüüpi liikuvpea.
The Showtec Airwolf is a powerful multi light effect that includes 6 adjustable rotating RGBW beams, a round strobe effect and a red/green pattern laser on a rotating base. You can adjust each head separately to cover a large area with narrow sharp beams. The strong SMD strobe and pattern laser are the finishing touch to this effect. The fixture is easy to control by DMX or using the automated and sound activated programs.
The Showtec Event Bar 2 CCT is a battery LED bar with 2x 20 watt spots. It has a quiet, fanless operation and is therefore suitable for any type of event. With its 4-step manually adjustable 3000 K – 6000 K colour engine you can set different warm to cold white temperatures.
The battery of the Event Bar 2 CCT lasts between 4 and 8 hours. The duration of the battery depends on the desired mode in which you have it. A 25° diffuser is included to increase its 10° fixed beam angle. A suitable carrying bag is also included.
You can easily attach the Event Bar Duo to a truss or pipe & drape with magnets and M10 holes on top of the unit.
The Showtec Galaxy 360 brings back old times with the advantage of new technologies. It is a moving head with a continuous rotating ball which contains 12 narrow full colour beams. It brings back the par 36 move effect but with the advantage of full colour and pixel control. The internal colour programs will help to create an exciting light show without advanced programming. The Showtec Galaxy 360 is ideal for vintage retro or disco events and will give an extra dimension to your event.
This LED tunnel flower gives the well-known moonflower effect.
This moonflower effect is equipped with no fewer than 469 colored 5mm LEDs. This makes this effect economical in use, but still has a very high light output. In combination with a smoke machine, the thin beams of light become visible. These rays are very similar to laser beams, but this light effect is a lot cheaper and the light rays are not harmful to the eyes.
In addition to the built-in programs, this effect can also be controlled with 9 DMX channels, so every light jockey can put on a great show.
The SDC-6 is a small battery operated 6-channel DMX controller. It is very suitable for easy applications such as exhibitions, small shops as well for testing of your DMX equipment.
• 6 individual Channel Fader
• 1 Master Fader
• 6 DMX Channels (1 to 6)
• Compact Design & Simple Operation
Very powerful 11,000-mW RGB laser projector with built-in Pangolin FB4 control module, intended for use in large venues. The FB4 module unlocks the award-winning QuickShow software, which means you can use this professional software completely free of charge. This opens up extensive possibilities for professional laser show control. It allows you to run your laser shows in a full network setup, controlled by the QuickShow software on your PC. You can also control it through your lighting console by Art-Net or ILDA, and it features an SD card interface for saving automatic, stand-alone playback.
By using linear analogue dimming modulation, the Solaris 11.0 can generate the full spectrum of colours. Its very precise and high-quality construction ensure perfect matching of the RGB beams and distortion-free images. Its wide 45° beam angle allows for large projection areas. It comes with all the necessary safety measures, like scanning system overload protection, a keyed interlock system, scan-fail safety, aperture masking plate, emergency stop system, and a keyed remote.
6 x 4 m – 128 RGB LEDs – incl. Controller.
The Showtec Star Dream is a black molton cloth with built-in LEDs (8 groups) and LED controller to create a starry sky. It is available in different sizes and LED types (white and RGB). It is also fully compatible with Wentex Pipe and Drape. The backdrop curtain is equipped with hook and loop and eyelets. The Star Dream has several operating modes such as Auto, Sound and Master/Slave. Control via DMX is also no problem (3-pin XLR in- & out).
The DAP Stack Case 3 is best suited for transporting one Star Dream. For two Star Dreams we recommend the DAP Stack Case 4.
Creates a black light effect with LEDs Available in lengths of 50 and 100 cm Less fragile than a conventional tube Long life span 18 x 3W UV LEDs Driver current: 680 mA Input voltage: 100 ~ 240VAC…47/63 Hz Power consumption: 60 W max @ FO
Stage Blinder – Flex Blaze is a set of 8 high-power LED audience blinders of 100 W each and a dedicated controller. Each individual pod has a powerful warm white COB LED of 3000 K with integrated amber LEDs to perfectly mimic the tungsten dimming of traditional blinders. Integrated RGB LEDs light sources allow you to create unique full-colour blaze effects. The powerful LED light source combined with a strobe functionality allows you to use the Stage Blinder FLEX Blaze as a strobe light with interesting colour effects. The light effect can be controlled via DMX/RDM, Master/Slave, but can also run in stand-alone mode with several built-in programs.
The blinder pods have a special mounting bracket with 4 holes at a 45-degree angle, so you don’t have to detach the pod from it to drill through the holes to mount it. The bracket also has a 12.5 mm hole, while the controller has two 12.5 mm holes and an M10 threaded insert for attaching a clamp. You can also attach a quick lock bracket to the controller and pods. The blinders and controller have a robust IP65-rated aluminium enclosure and are ready for outdoor shows. Dedicated 4x 2.5 m and 4x 5 m cables with control signals and power are included. Additional dedicated cables of various lengths are available separately (maximum length allowed: 30 m).
Recorded Channels 512 channels.
Storage Capacity Due to a very sophisticatedDMX data compression ther is no fixed storage capacity.
The more DMX channels are changing their value, the faster the memory would be full.
Number of sequences 32 different sequences can be recorded.
Link up sequences Number of repeats and “action on end”.
DMX termination 120Ohm built in.
Input Power 50VAC – 276VAC 50/60Hz 0.3A
Operating temperature -0°C to 45°C
The XRC-200 is an easy to use DXM recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals.
The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time.
With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically.
The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device.
The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.
XSP-5B DMX 5way DMX Splitter & Booster Box with XLP 5pin Connectors. Suitable for Desk Top and Truss Mounting. Supplied with M10 Threaded Socket (max 20mm) and Eye for Safety Bond.
The UNI BAR is a new very compact single DMX dimmer for truss or stands. It’s very lightweight and with 10A max powerful to run big flooters or PAR cans. The dimmer preset and limit functions are great for a long lifetime of your lamps. You may mount the UNI BAR with standard truss clamps or couplers.
The Hellball 3 is a futuristic mirror ball effect with LEDs. With semi-transparent housing and 3x 3W RGB LEDs, it produces wonderful effects. It also has three different operating modes: DMX512, automatic and sound to light mode.
The Blackbox F-1 G6 is a simple and reliable RDM and Wi-Fi transmitter and receiver. This allows you to create a solid wireless connection up to a distance of 700 metres (2200 ft). You can send / receive up to 512 DMX channels with it. In addition, it can be used in combination with previous generations, such as the G3, G4, G4S and G5. If you want to connect the Blackbox F1 G6 to a Lumens Radio CRMX transmitter, you can opt for the optional CRMX upgrade for F1 G6. This makes this receiver box the first in the world to work with more than two million wireless DMX units.
The Blackbox F-1 G6 is an advanced device, yet very easy to control with just one button and status indication LEDs. You can also easily perform updates via Bluetooth using the W-DMX Configurator app. The aluminium housing has a built-in M10 clamp mount and hole with which it can be securely attached with hook and loop and an extra security thread.
The Blackbox R-512 G6 is a simple and reliable RDM and Wi-Fi receiver. This allows you to create a solid wireless connection up to a distance of 700 metres (2200 ft). You can receive up to 512 DMX channels with it. In addition, it can be used in combination with previous generations, such as the G3, G4, G4S and G5. If you want to connect the Blackbox R-512 G6 to a Lumens Radio CRMX transmitter, you can opt for the optional CRMX upgrade for R-512 G6. This makes this receiver box the first in the world to work with more than two million wireless DMX units.
The Blackbox R-512 G6 is an advanced device, yet very easy to control with just one button and status indication LEDs. You can also easily perform updates via Bluetooth using the W-DMX Configurator app. The aluminium housing has a built-in M10 clamp mount and hole with which it can be securely attached with hook and loop and an extra security thread.
The UglyBox is haiLED as the ‘riggers best friend’, an indispensible tool in the lighting designer or technician’s arsenal. With the capability to receive W-DMX™ signals to check their signal strength, as well as check the output of DMX channels, the W-DMX™ UglyBox is great for testing the limits of the W-DMX™ radio system and/or checking DMX data, in a portable, pocket sized device.
The UglyBox is great for checking if a system will work before installation, and checking DMX levels in a system. The W-DMX™ UglyBox can also be used to check W-DMX™ signal history, allowing the user to see quickly any transient problems in the system. The Uglybox runs on standard AA batteries and last over 8 hours.
“Tehniline produktsioon” hõlmab põhjalikku teenust, kus meie laialdased kogemused ja teadmised on aluseks, et tagada iga sündmuse jaoks parim võimalik tehniline lahendus. Meie spetsialistid töötavad teie visiooni ja eesmärkide nimel, et leida kõige sobivamad tehnilised lahendused, alates heli- ja valgustehnikast kuni lavakujunduse ja visuaalefektideni. Me mõistame, et iga sündmus on unikaalne, ja seetõttu pühendume täielikult sellele, et luua just teie vajadustele vastav lahendus. Meie eesmärk on tagada, et tehniline teostus toetab sündmuse üldist kontseptsiooni ja aitab luua meeldejääva elamuse kõigile osalejatele.
Meie sündmuste täiskorralduse teenus on loodud selleks, et pakkuda teile muretut “võtmed kätte” lahendust, mis hõlmab kõiki aspekte teie ürituse planeerimisest ja teostamisest. Olgu tegemist koolituse, konverentsi, vastuvõtu, suvepäevade või festivali korraldamisega, meie meeskond on valmis pakkuma terviklikku tuge, kattes kõik vajalikud teenused alates ideest kuni elluviimiseni. Lisaks tavapärastele sündmuste korraldamise elementidele, nagu asukoha valik, tehniline tugi ja logistika, pakume ka ainulaadset teenust nagu ajutiste köökide ehitamine, et tagada kohapealne toitlustamine vastab teie ja teie külaliste vajadustele. Meie eesmärk on pakkuda laitmatut teenust, mis ületab teie ootusi ja tagab sündmuse edu igal sammul.
Mõistame, et teatud sündmuste või projektide puhul on klientide jaoks otstarbekam investeerida tehniliste lahenduste soetamisse, mitte neid rentida. Meie lahenduste müügi teenus on loodud selleks, et toetada teid nendes otsustusprotsessides, pakkudes konsultatsioone, müügipakkumiste koostamist ja tehnilise varustuse tarnimist. Meie eksperdid on siin, et aidata teil teha informeeritud otsuseid, pakkudes kohandatud lahendusi, mis vastavad täpselt teie vajadustele ja eelarvele. Olgu teie nõudmised mis tahes, meie eesmärk on tagada, et teie investeering tehnilistesse lahendustesse on asjakohane, tõhus ja jätkusuutlik, aidates teie ettevõttel või üritusel edukalt areneda.
FunTIME rendiladu on teie usaldusväärne partner, kui vajate kvaliteetset tehnikat ükskõik milliseks sündmuseks. Meie mahukas lao valikus on kõike, mida vajate, et muuta oma üritus meeldejäävaks: tipptasemel heli- ja valgustehnika, professionaalne foto- ja videotehnika, mitmekülgne konverentsitehnika, ainulaadsed eriefektiseadmed, praktiline köögitehnika, stiilne mööbel, disainielemendid, vastupidavad lavad ja riputusfermid. Pakume paindlikke lahendusi, et vastata teie spetsiifilistele vajadustele ja eesmärkidele, tagades, et iga detail on arvestatud teie sündmuse edukaks toimumiseks.
Meie sündmuste disainilahendused on loodud selleks, et muuta iga vastuvõtt või pidu unustamatuks elamuseks. Me mõistame, et erakordse sündmuse võti peitub sageli detailides – olgu selleks siis hoolikalt valitud elemendid lavale, laudadele või sissepääsu juurde. Meie spetsialistid töötavad pühendunult, et iga detail oleks läbimõeldult valitud ja sobituks tervikliku disainikontseptsiooniga, luues harmoonilise ja meeldejääva keskkonna. Alates dekoratiivsetest elementidest kuni funktsionaalse disainini, tagame, et iga nüanss aitab kaasa üldisele atmosfäärile, et teie sündmus ei oleks mitte ainult sündmus, vaid tõeline elamus.
Meie professionaalne meeskond koosneb andekatest fotograafidest ja video-operaatoritest, kes on pühendunud teie sündmuse jäädvustamisele kõrgeima kvaliteediga. Pakume mitmekülgseid foto- ja videoteenuseid, mis vastavad teie vajadustele, olgu selleks siis ürituse oluliste momentide jäädvustamine, emotsioonide tabamine või oluliste sündmuste dokumenteerimine. Meie lisateenuste hulka kuulub fotokabiini rent, mis pakub lõbusat meelelahutust ja mälestusi teie külalistele, otseülekande võimalus internetis, et jagada sündmuse hetki reaalajas laiema publikuga, ning fotode printimine sündmusel, andes külalistele võimaluse koju viia personaalsed mälestused. Meie eesmärk on pakkuda teenust, mis mitte ainult ei jäädvusta teie sündmuse, vaid rikastab seda, luues püsivaid väärtusi ja mälestusi.