AsteraBox and its successor AsteraBox WIFI serve as interfaces between lights and controllers.
AsteraBox functions as a Bluetooth Bridge that connects lights with phones or tablets and enables AsteraApp control. Thanks to the built-in battery, it can be carried around to ensure that it stays close to your handheld device. While the classic AsteraBox connects via Bluetooth, the newer version also supports Wifi when connecting box to phone or tablet.
In addition, both AsteraBox models can be used as wireless DMX transmitters using LumenRadio’s industry-leading CRMX technology. This way you can control Astera lights as well as other CRMX-enabled lights from a DMX controller.

QuickQ Rack is a small rack mountable version of the QuickQ console designed for installations. It features the same operating system as QuickQ series consoles, but is designed to operate as a remote system without physical user control.
Featuring 10 playback/execute buttons on the unit, the QuickQ Rack is ideally paired with 10 Scene wall plates.
Supporting four universes QuickQ Rack is ideal for installations, control rooms and bars. The unit can be used as a desktop box or rack mounted with the supplied rack ears.

The Swisson XSR series are reliable DMX and RDM splitters and boosters that process DMX and RDM signals with a high level of reliability suitable for professional use.The XSR has a specially designed power supply which ensures safe operation even under harsh mains conditions. All ports are individually optically isolated and well protected against transient over voltages.
In the “DMX only” mode all non-DMX data is filtered out and a clean signal without RDM or other protocols is generated.
The XSR splitters are visible to RDM controllers. This gives the user an better overview of the installation and may help with troubleshooting.

• High level of reliability
• Boosts DMX & RDM
• Regenerates DMX & RDM
• Reduces reflection problems
• Distributes DMX & RDM
• Optical isolation on each individual port
• Connection types: 5-pin and 3-pin XLR models
• RJ-45 and pluggable screw terminals models
• Housing types: Installation, box, rack and double rack models
• 5 DMX outputs per universe (10 outputs on double rack models)
• Built-in line termination

Wireless DMX system 2.4 GHz.

• DMX input and output, 3-pin XLR
• Auto-switching transceiver
• Wireless DMX eliminates extensive cabling between DMX controller and the DMX-controlled units in lighting installations
• Due to GFSK modulation with 78 channels, interference-free operation also alongside other QuickDMX transmitters and wireless devices in the 2.4 GHz band (e.g. Wi-Fi and Bluetooth)
• Simultaneous operation of up to 6 transmitters, thus control of 3072 DMX channels (6 DMX universes) possible
• 1 to 512 QuickDMX receivers can be controlled by each transmitter
• Plug & Play: quick and easy setup with one operating button for connecting/disconnecting QuickDMX units
• LED indication for functions
• Micro USB port PSU included
• 2.4 GHz ISM band – license-free worldwide
• Can receive and process up to 512 DMX channels
• Can transmit up to 512 DMX channels
• Controlling by DMX QuickDMX built-in
• Use a operating range up to 400m

The MagicQ MQ500 Stadium is designed to operate at the highest level of show control, supporting up to 200 universes direct from the console without the need for external processing. MagicQ MQ500 Stadium is designed for high performance and complex shows. Its features allow shows to be designed from concept to reality, including lighting, media, and LEDs.
MQ500 Stadium features dual HD resolution multi touch 15” displays with adjustable viewing angle and multi touch gesture support. It has the largest number of playbacks in the ChamSys family, with 42 playbacks made up of both fader and executor playbacks for live busking. This includes 15 full faders, 15 executable playbacks, and a dedicated section of 12 multipurpose Macro/Execute/Playbacks/Palette keys. For additional control connect a MagicQ Stadium Wing and get even more playbacks and another touchscreen display as well.
The MQ500 Stadium has inbuilt MagicVis 3D visualiser with high quality beam and gobo rendering. This means you can preprogram a new song or create new effects offline, and save time onsite.
The MQ500 Stadium has 4 built-in DMX ports and inbuilt 4 port ethernet switch.
This versatile console also includes an intensity wheel and 100mm split crossfaders for theatre control.

The MagicQ MQ80 is an extremely powerful console in a small size, supporting 48 universes direct from the console and 4 DMX ports supporting RDM, but still fits with in checked luggage restrictions.
It has a large 12” high resolution display provides easy access to all MagicQ features including the Plot window where fixtures can be selected and focused graphically.
MagicQ MQ80 features the same software found on all MagicQ consoles, and uses the same show file formats, enabling compatibility between all MagicQ products. MagicQ MQ80 can be connected over network to a PC or Mac running the free ChamSys free MagicVis lighting visualisation software, or MagicHD media player software (for output of up to 8 layers of HD media) at no extra cost.
The construction of the MagicQ MQ80 incorporates high reliability components, including durable metal Neutrik locking connectors.  The inbuilt 4 port Ethernet switch is protected by the UPS, thus ensuring that both the console and the network switch maintain operation even during a power loss.
The console features a Kensington security slot for securing the product. Both soft bags and flight cases are available as optional extras.

The XES-2T6 is a six plus two port Gigabit Ethernet switch with two ports being aggregated to a high throughput, redundant trunk link. The six other ports are individually assignable to groups (IEEE 802.1Q VLANs) that may participate in completely independent networks that do not interfere with each other. Thanks to the graphic OLED display, the encoder knob and a push button for each of the six configurable ports, the switch is intuitive to setup and the configuration is done in next to no time.

The grouping and the redundant fast backbone link make the XES-2T6 an ideal solution for interconnecting the stage with the FOH for instance.

As a layer 2 switch, the XES-2T6 is generally unaware of the application and therefore it works well with any protocol that operates on top of TCP/IP and with many Ethernet based protocols. However, special precautions have been taken to ensure that the XES-2T6 works perfectly with Art-Net, sACN and Dante. The Art-Net specification for example expects the controller to only send data every few seconds or when an update is available. A typical switch might put itself into sleep mode when no traffic is observed, not so the XES-2T6; it stays ready to forward data anytime without delay.
With the increased acceptance of TCP/IP and Ethernet based protocols, the proper operation of the network and its equipment has become critical for many shows. Therefore, it is crucial to professionally plan, configure and install the network for any show or venue. As a measure to further lower the chances of network outages, the XES-2T6 comes equipped with two separate switch mode PSUs that can be powered from two different mains supplies.

• Optimized for Art-Net, sACN and Dante
• Two aggregated trunk ports
• Groups (IEEE 802.1Q VLANs)
• Four queue DiffServ (differentiated services) for optimal quality of service (QoS) with the Dante protocol
• No broadcast bandwidth limitation
• Two universal power supplies (redundant PSU)
• Neutrik powerCON inputs and outputs for primary and backup power supply unit
• Neutrik etherCON sockets for network connection
• Rack mountable, 1 height unit

Studio 12 Scan Control is a reliable user-friendly lighting console, able to control 12
or 24 channels of dimmable fixtures, and 12 ‘intelligent’ units using up to 36 DMX
channels each.
Studio 12 Scan Control’s controls include:
Manual Presets (2 rows of 12 faders, which can be used as two 12-channel presets
or a single 24-channel preset);Registers (1 row of 12 faders which control the memory
registers);Light Chase controls (for programming and controlling chases); DMX Unit
controls (per controlling moving head fixtures, scanners, colour-changers, dimmers, and
any other equipment using DMX 512 protocol).Studio 12 Scan Control is an extremely
versatile lighting control console, ideal for a vast range of applications: from concerts to
theatres, clubs to television studios, from small to large show events.

Studio 12 is a reliable use-friendly lighting console, able to control 12 or 24
channels of dimmable fixtures.
Studio 12 is an extremely versatile lighting control console, suited to a vast range of applications:
from concerts to theatres, clubs to television studios, from small to large show events.

The XRC-200 is an easy to use DXM recording and replay unit. The operating concept is similar to a CD player and can be used by non-professionals.
The sequences are recorded from a lighting console, or other DMX output device, onto the device. The XRC-200 replays the recorded sequences in real time.
With the ability to record 2 DMX universes (1024 DMX channels), the XRC-200 is also suitable for LED and moving light applications/installations. A variety of applications in architecture and entertainment, tradeshow, retail and museum lighting are covered with the XRC-200 easily and economically.
The optional XRC-CT15B contact box with 15 inputs for dry contacts allows a customized integration of triggers for control of the XRC-200 in. In addition, the XRC-200 has an internal timer for show and device control. The device can also be set up to be remotely operated or triggered by DMX. During live shows, the XRC-200 can be used as a DMX backup device.
The sequences and settings of the XRC-200 can be stored and managed with the XRC-200 PC software, which is connected via the USB port.

• Record and play back 64 Sequences
• 10 Configurable play lists
• Configurable fade times
• Optional 15 Control Inputs
• 2 DMX Inputs
• 2 DMX Outputs
• Built in timer
• Backup device
• USB connection for firmware update, and PC software
• PC software for uploading, downloading and storage of shows

XSP-5B DMX 5way DMX Splitter & Booster Box with XLP 5pin Connectors. Suitable for Desk Top and Truss Mounting. Supplied with M10 Threaded Socket (max 20mm) and Eye for Safety Bond.

The UglyBox is haiLED as the ‘riggers best friend’, an indispensible tool in the lighting designer or technician’s arsenal. With the capability to receive W-DMX™ signals to check their signal strength, as well as check the output of DMX channels, the W-DMX™ UglyBox is great for testing the limits of the W-DMX™ radio system and/or checking DMX data, in a portable, pocket sized device.
The UglyBox is great for checking if a system will work before installation, and checking DMX levels in a system. The W-DMX™ UglyBox can also be used to check W-DMX™ signal history, allowing the user to see quickly any transient problems in the system. The Uglybox runs on standard AA batteries and last over 8 hours.

The W-DMX™ BlackBox series is an industry leader for Wireless DMX and RDM control, packed into a tough, roadworthy die-cast metal casing. As with all our top W-DMX™ technologies, the W-DMX™ BlackBox series is built for the true lighting professional.