• Heavy Duty Black 3-Section Boom Only w/Ostand

    Heavy Duty Black 3-Section Boom Only w/Ostand

    Diameter 35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at maximum extension (250cm) with 7kg of counter weight. Weight: 2.2kg, boom only. Dismantled length: 100cm. Assembled: 280cm.

  • Hercules Duo-Guitar Stand Autograb GS422BPLUS

    Hercules Duo-Guitar Stand Autograb GS422BPLUS

    The HERCULES Double Guitar Stand GS422B PLUS accommodates two instruments and features the foldable Auto Grip System (AGS) yokes, Instant Height Adjustment Clutch, Specially Formulated Foam (SFF) padding contacts and the adjustable back rests.

    • Two folding built-in Auto Grip Systems safely lock the instrument(s) in place. The AGS yoke is designed to accommodate more guitar neck sizes from 40 mm – 52 mm (1.57” – 2.05”) including classic, acoustic, electric and bass guitars.
    • The attached N.I.N.A. (Narrow Instrument Neck Adjustment, HA301) are specially designed to increase the thickness of AGS arms to accommodate narrow neck instruments from min. 28 mm (1.10”) like banjos and mandolins.
    • The Instant Height Adjustment Clutch with Locking Pin adjusts stand height quickly, easily and securely.
    • The Folding Back Rests with multi-angle position adjustment support the instrument securely and fold up securely for travel.
  • K&M 17541 A-guitar stand

    K&M 17541 A-guitar stand

    For acoustic guitars. Stable, sturdy, simple and easy to adjust and fold. Width adjusts from 220 to 350 mm. Support arms are covered with exclusive non-marring material to protect instrument finishes.

  • K&M 17570 E+A guitar stand »Duet«

    K&M 17570 E+A guitar stand »Duet«

    One for All! This practical all-rounder is, in fact, very versatile. Either for Bass, Acoustic or E-Guitars, the specially formed support arms guarantee that all instruments are on sound and stable footing. The rubberized support arms protect the guitar finish. A push-button-system makes it easy to set up the stand for different sized guitars. For transport the stand folds flat.

  • K&M 18860 Keyboard stand »Spider Pro«

    K&M 18860 Keyboard stand »Spider Pro«

    The »Spider Pro« is the further development of the »Spider« keyboard stand. The »Spider Pro« is equipped with a pair of extendable support arms, as well as an additional pair of extendable support arms with a 15° tilt angle. The »Spider Pro« can be fitted with additional support arms for a third keyboard. The »Spider Pro« also has a 3/8″ or 5/8″ threaded connection for attaching microphone booms. The tilt of the »Spider Pro« is greater than that of the »Spider« to allow easier playing when two keyboards are being used. On top of this, the »Spider Pro« also provides optimum leg movement thanks to the raised design of its feet, continuously variable height adjustment and a special mechanism for collapsing the stand as well as easy carrying of the stand in the bag, which is available as an optional extra.

  • K&M 21021 Overhead microphone stand

    K&M 21021 Overhead microphone stand

    Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport.

  • K&M 21080 Microphone stand »Soft-Touch«

    K&M 21080 Microphone stand »Soft-Touch«

    Boom arm: 2-piece telescopic design Boom arm clamping: wing nut Boom arm length: from 425 to 725 mm Weight: 3 kg Height: from 925 to 1,630 mm Height adjustment: clutch Leg construction: socket with foldable legs Material: steel Quality level: Starline Rod combination: 2-piece folding design Size when folded: 96 x 85 x 985 mm…

  • K&M 213 Speaker stand

    K&M 213 Speaker stand

    A high quality steel speaker stand with zinc die-cast clamps for professional use. Infinitely variable height adjustment with a hand crank and push button system which prevents an uncontrolled reverse motion. There is an additional locking screw for extra safety. Extension tube diameter 35 mm, suitable for speakers and lighting crossbars with an integrated M10 thread connector.

  • K&M 21366 Distance rod »Ring Lock«

    K&M 21366 Distance rod »Ring Lock«

    Unshakable and Stalwart! This high quality, height adjustable distance rod is a guarantee for a secure, stable and quiet connection to satellite systems. The height is adjusted by an easy-to-use spring-loaded bolt and locking screw.
    The unique patented expanding mandrel system provides a stable, tight and firm fit for subwoofers and satellite speakers. The movable plastic splints provide for a vibration-free connection between the rod and the speaker. Connecting the speaker is easy and is done using the handy ring lock – which is simply placed in position and screwed on.

  • K&M 21450 Speaker stand

    K&M 21450 Speaker stand

    An easy-to-carry speaker stand made of high quality aluminum. Fiberglass-reinforced fittings and an additional safety pin ensure stable support for the speakers. The height and feet adjust by an easy-to-use clamping lever.

  • K&M 232 Table microphone stand

    K&M 232 Table microphone stand

    Sound-absorbing cast-iron base with black powder-coated screw-in rod, 3/8″ thread.

  • K&M 25900 Microphone stand »Soft-Touch«

    K&M 25900 Microphone stand »Soft-Touch«

    Half-height microphone stand complete with an extendable boom arm for drums or specialized recording techniques.

  • K&M 25950 Microphone stand

    K&M 25950 Microphone stand

    Extra low Microphone stand.

  • K&M 26729 Speaker stand- square base

    K&M 26729 Speaker stand- square base

    Attractive speaker stand with flat steel plate (406 x 406 mm), useful carrying handle and cable management. The stand is ideal for use where space is at a premium. Depending on requirements, there are three ways to position the stand column. In addition to the centric and off-center position, the rod combination can also be mounted in the corner. The height is fixed with a safety hook and secured with a low-noise, backlash-free clamping screw. The slim design of the clamp enables space-saving transportation and ensures a stylish appearance. The usable height is between 1,110 and 1,810 mm and is adjusted in 4 steps of 175 mm. The maximum load capacity when fully extended is 18 kg.

  • K&M 26735 Speaker stand - round base

    K&M 26735 Speaker stand – round base

    A decorative space saving speaker stand. The heavy cast iron plate with a relatively small diameter requires little space. The tried-and-tested spring-loaded bolt with locking screw makes height adjustment easy and safe.

  • K&M Table-style stage piano stand

    K&M Table-style stage piano stand

    The stable and sturdy stage piano stand is great for playing the piano in a seated or standing position. The height can be adjusted between 600 and 1000 mm without the use of tools.
    The stand is equipped with height adjustable legs with integrated levelling feet for uneven surfaces. The stage piano stand is collapsible for easy and compact transport

  • Manfrotto 143 Kit Magic Arm Set

    Manfrotto 143 Kit Magic Arm Set

    Functional and practical, the Magic Arm Kit is an essential part of any photographer’s or content creator’s kit. Made to the highest quality Italian standards, the tough and hard wearing aluminium material makes this all in one solution a highly dependable accessory.
    Includes (1x) Magic Arm (143N), (1x) Camera/Umbrella Bracket (143BKT), (1x) Super Clamp (035), (1x) Super Clamp.
    A highlight of this product is its smart centre lever, especially made to lock for all three main movements during your photography and video work. This fast and secure solution gives you assurance that there won´t be any unwanted slips or problems when you need to focus on getting that perfect shot.
    The design of the Magic Arm balances strength with flexibility. Weighing a mere 1.7kg, the Magic Arm can securely hold weights up to 3kg while also extending to a maximum length of 53cm. With reliable features and uncompromised build quality, you can trust this kit to handle the most demanding of photography work.
    Designed to give you everything you need in one bag, it includes a camera bracket, a super clamp, and a handy backlight base. All in all, this gives you the complete magic photo arm set.
    Each end of this arm is equipped with a standard-size 16mm spigot which is Anti-Rotation Super Clamp 035 Compatible and features one 1/4” female thread attachment on one side and 3/8” female thread attachment on the other. In addition, the arm is compatible with a whole host of Manfrotto Lighting Accessories such as floor stands, Clamps, Camera Brackets and more. This gives you a fully compatible and functional magic photo arm you may take with you wherever you go. The perfect item of photography equipment to support LED lights, studio lighting and studio equipment, in fact just about anything in or out of the studio needed to be positioned flexibly and securely!
    Features
    – Professional Magic Arm Kit
    – Superior construction for maximum strength and durability
    – Ergonomic handle for precision-controlled movement
    – Magic Arm extends to 53cm giving you maximum flexibility
    – Includes all essential accessories

  • Manfrotto Double-Ended Spigot

    Manfrotto Double-Ended Spigot

    This Manfrotto Double-Ended Spigot is compatible with a variety of stands and grip gear including the 2940, 2941, 3077, 308, and 3095. It has a 5/8″ (16 mm) diameter with 1/4″-20 and 3/8″ threaded ends.

  • Optogate MIC LIFT V2

    Optogate MIC LIFT V2

    The MIC LIFT V2 motorized micophone stand is our answear to many enquires from customers. The motor and the main mechanical parts are completely mounted in the base of a stand in order to keep the visible parts small and make the MIC-LIFT V2 usuable for TV shows and other applications where smart and discrete solutions are required. The MIC LIFT V2 can be controlled from every dmx light desk as well as with the inluded remote control. The remote control and the MIC LIFT V2 can be connected via 3 pin mic cable or the multicore. 50 different presets/heights can be savesd and recalled with the remote. The actual height of the MIC LIFT V2 is indicated on the remote control.

  • Proel RSM360M

    Proel RSM360M

    Professional music stand with perforated orientable music holder. New block clamp system for a fast, non slip height-adjustment, and a wide tripod base.

  • TOCA Conga Stand 3700SN

    TOCA Conga Stand 3700SN

    Toca’s Barrel Conga Stands are crafted from sturdy-yet-lightweight steel, and are finished with a black powder coating for a professional look. Thick, soft padding is attached at the point of contact with the drum, preventing physical damage and eliminating rattles. This stand will hold any conga from 25 to 28 cm.

  • Work Lift Pro LW 130 Traversenlift

    Work Lift Pro LW 130 Traversenlift

    LW 130 is one of the most reliable lighting stand in the market. Like the previous models, it includes an automatic-brake winch.
    Made of steel, with silver metal colour, it easily holds loads of 100 kg and lifts them at 3 meters high. It features foldable legs and an extensible mast. Its firmed and balanced base ensures a safe operation.