Tehke julgelt broneerimistellimus, vaatame selle üle ja võtame Teiega ise ühendust! Peida
Showing all 11 results
TheAputure F10 Fresnel is the first Bowens Mount Fresnel on the market made to match the size of traditional 10-inch Fresnel lights like a tungsten 5K, with a 250mm diameter lens made of real glass. The size of this Fresnel allows filmmakers to get punchy hard-light that maintains a subtle soft quality that is perfect for dramatic expression.
As an Aputure Fresnel, this modifier also uses dual-lens optical design, utilizing a condenser lens to refocus the light from a flat-chip COB LED to optimize it for the front Fresnel element, further enhancing the fixture’s illuminance. When combined with the Aputure LS 600d Pro, the fixture can output over 29,300 lux at 3 meters.
To ergonomically and precisely adjust its variable 15°-45° beam angle, the F10 Fresnel uses Aputure’s helicoid focus design from the Fresnel 2X. The F10 also incorporates a ventilation design that prevents the COB from overheating, while also minimizing any light leaks.
The drop-in accessory slot is compatible with Aputure’s F10 Barn Doors, which provide 8 leaves made to properly cut light from the large Fresnel.
The Fresnel 2x design features dual optical intensifying elements, a large 5.5” front Fresnel lens, improved ventilation, and the elimination of light leaks, making this the ultimate Bowens Mount Fresnel.
DUAL LENS OPTICAL DESIGN
The rear lens focuses and magnifies the beam onto the larger 5.5” front Fresnel lens, maximizing light utilization. Our dual lens optical design makes the Fresnel 2X twice as powerful as the original Aputure Fresnel, and makes the 120d II almost 10 times brighter than with the reflector.
NEW ROTATING DESIGN
By utilizing a new rotating barrel design, the Fresnel 2X creates an intuitive user experience, similar to a camera lens. The smooth focus throw gives users an ability to accurately finesse the beam angle of their light source, allowing you to easily spot or flood your light with a simple twist.
VERSATILITY AND PORTABILITY
By utilizing a universal Bowens Mount, this fresnel can be attached to a myriad of lights. The 7” front ring also accepts the Aputure Barndoors, meaning your light shaping options are endless. With the included carrying case, the Fresnel 2X can easily follow you wherever your shoots may take yo
This spherical softbox can pop open and be ready to use in mere seconds. With the APUTURE Lantern, you can produce soft, even light wherever your shoots may take you.
EVEN, OMNIDIRECTIONAL LIGHT
By utilizing a 26” spherical design, the Lantern spreads the light from your LED or Studio Strobe in all directions with a 270° beam angle.
ART OF CONTROL
The Aputure Lantern is one of the only spherical softboxes on the market with a 4-section fully adjustable light control skirt. By using a hook-and-loop design, the removable skirts can attach in any position, to quickly and precisely control your soft light.
READY FOR RUN AND GUN
With its tension-based quick release frame, the Lantern can be set up or broken down in just a few seconds, allowing you to set up fewer lights, faster.
ANY BOWENS LIGHT
With the ability to fit onto any Bowens mount Studio Strobe or LED fixtures, such as our 120d or 300d series lights, the Lantern is the perfect photo or video accessory for casting soft light over a wide area, while still maintaining control.
The Light Dome 150‘s expansive 5 foot (150cm) transforms Bowens Mount point-source lights into a massive soft source, elegantly illuminating large spaces.
MULTIPLE DIFFUSIONS
Like other members of the Light Dome family, the Light Dome 150 includes two diffusion options (1.5 & 2.5 Stop), allowing you to adjust the density and quality of your soft light.
QUICK BUILD
Using Aputure’s pioneered quick-release setup design, the Light Dome 150 remains one of fastest modifiers on the market and can be assembled in seconds.
LIGHT CONTROL GRID
No Aputure soft light modifier would be complete without the ability to control the direction of the light source. The Light Dome 150 includes a 45° fabric light control grid to minimize excess spill light so you can achieve the perfect look.
PERFECTLY CIRCULAR
Following the Light Dome II, the Light Dome 150 utilizes a 32-sided design, resulting in one of the most perfectly round modifiers on the market, allowing for completely circular reflections.
UNIVERSAL ACCESSORY
The entire Light Dome lineup utilizes the most common lighting accessory mount in the world: the Bowens Mount. And the Light Dome 150 is no exception, allowing it to be used in conjunction with any Bowens Mount fixture including Aputure’s Light Storm product line, and works especially well with the output power of the LS 600 series.
Bundled with a fabric honeycomb grid add-on that helps control the light spill spread by 40 degrees, and suitable for portraits, head shots, interviews, and fashion, the 34.8″ Light Dome II from Aputure is a 16-sided modifier that offers quality of light options and wide compatibility with Aputure lights, as well as those of the many other manufacturers that use the popular Bowens front accessory mount. The structure of the Light Dome II is fortified by its 16 durable steel support rods, while its silver interior maximizes your light source’s output. Its 24″ depth produces a focused light with directional control that can be narrowed further for selective lighting with the included 40° fabric grid. Aputure provides a removable inner diffuser and both 1.5-stop and 2.5-stop front diffusers that you can use individually or all at once for softness and contrast options. The supplied gel filter holder also offers creative color options. Any way you use it, you’ll find that the Light Dome II renders soft, flattering light with a wraparound quality and produces round, natural-looking catchlights in the eyes of your subject.
