Apple iPhone 7 + Charger Dock Station
iPhone on nüüd veelgi võimekam – vastupidavam aku, laitmatu stereosüsteem ning kirgas ekraan. Vee- ja tolmukindlus ning meisterlik kaamera. Iga detail on jõuline nagu uus iPhone ise.
Showing all 18 results
-
-
-
HUAWEI LTE CPE E5186s-22a
HUAWEI E5186s-22a is an LTE CPE (Customer Premises Equipment) specifically for residential and small office users. The E5186s-22a is designed for high-quality performance in today’s 2G/3G and LTE networks with high-speed internet, Wi-Fi and voice telephone services.
The E5186s-22a provides the wireless Internet accessing function, the routing function and network address translation (NAT) function, and supports LTE Cat6 20MHz+20MHz Carrier Aggregation, Wi-Fi 802.11b/g/n/ac which goes up to 700 Mbps.
The E5186s-22a CSFB/VoLTE(supported in future) function can be instructed to access the existing GSM/WCDMA networks for voice calls, if VoIP services are not available for the operator.
Additionally, the E5186s-22a provides friendly web-based Management, and TR069 based remote management (Customizable). -
Luminex | GigaCore 20t -16x1G – 4x10G(SFP+) – PoE++
The GigaCore 20t is a 10 Gigabit Ethernet switch for professional touring applications in lighting, audio and video with a frequent tear-down & built-up requirement or for any other application where ruggedized connectivity is necessary. It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.
Robust yet silent design
A robust yet silent design allows you to use GigaCore in any AV environment. Fans are speed controlled to have minimal noise impact and guarantee a long-life operation. This allows you to place the GigaCore in the most quiet environments like theaters and studio’s.
-
Luminex 10GBase Single Mode Fiber Transceiver
This single mode fiber (SMF) SFP+ transceiver provides 10GBase-LR throughput to up to 10km making use of a wavelength of 1310nm over a duplex LC connector.
-
MikroTik RBOmniTikUPA-5HnD – OmniTIK 5 PoE
OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has ve 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.
LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.
The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters to worry about. -
Netgear Switch AV Line GSM4210PX-100EUS
8x1G PoE+ 220W and 2xSFP+ Managed Switch.
Switching engineered for 1G AV over IP with versatile mounting options for under a table or behind a display.
Pre-configured for out of the box functionality! -
Netgear Switch MS108TUP-100EUS
Provides 8 ports 1G/2.5G with 4 PoE+ ports and 4 Ultra60 PoE++ ports making it a perfect switch for WiFi 6 AP connectivity, IP surveillance and more.
-
NovaStar 10G SFP module – SM
Compact 10Gb/s optical transceiver module for serial optical communication applications. It can convert serial electrical data streams to optical output signal, and optical input signal to serial electrical data streams. The high speed electrical interface is fully compliant with SFI specification. Choose from either single mode (SM), or multi mode (MM).
The NovaStar 10G SFP modules are compatible with all NovaStar devices that have an SFP connection. -
OEM 3G/4G LTE 12dBi Outdoor Dome Antenna 800-2600MHz
This high gain directional multiband 4G panel antenna is designed for 800MHz (2G / 4G), 900Mhz (4G), 1800MHz (3G / 4G), 2100MHz (4G) and 2600MHz (4G) frequency band and supports all established standards like GSM, 2G, 3G and 4G (800 / 900 / 1800 / 2100 / 2600). The antenna has a gain of up to 12dBi and helps you to improve your 2G, 3G or 4G connection even on long distances. To get the best result the 2G/3G/4G antenna should aligned exactly to the transmitter base station it is connected to. This 4G antenna works perfectly with LTE / 4G devices which have external antenna port. Compatible 4G Routers with external SMA female antenna port:- Telekom Speedport LTE, Speedport LTE II- Telekom Speedbox LTE, SpeedBox LTE II, SpeedBox LTE III- Telekom Speedport Hybrid- Vodafone Easybox 904 LTE- Vodafone B1000, B2000, B3000- Vodafone LTE-Modem- Vodafone LTE-Turbobox LG FM300- O2 LTE Router- FritzBox LTE- Router (except FritzBox LTE 6842)- D-Link DWR-921- Huawei B390, B593, B890- Huawei E5186- Teltonika RUT230, RUT240, RUT550, RUT950, RUT955- Many more… Optionally we offer a pair of antenna cables of type LMR200 with a length of 2.5m, 5m, 10m and 15m with N male to SMA male (fits to the most common LTE routers – see list above) connectors. The enclosure of the antenna is made of solid plastic and stainless steel. The robust, light weight and UV resistant construction is weatherproof. This allows to use this 4G antenna for outdoor appliances. The antenna is designed for mast/pole or wall handle installation. A mounting kit (angle bracket and u-clamp for 30-50mm diameter handles) is included.
-
ProLabs AFCT-5715APZ Compatible TAA 1000Base-LX SFP Transceiver – SMF, 1310nm, 10km, LC, DOM
This Avago® AFCT-5715APZ compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Tansceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters.
-
Swisson Premanaged Gigabit Ethernet Switch – XES-2T6
The XES-2T6 is a six plus two port Gigabit Ethernet switch with two ports being aggregated to a high throughput, redundant trunk link. The six other ports are individually assignable to groups (IEEE 802.1Q VLANs) that may participate in completely independent networks that do not interfere with each other. Thanks to the graphic OLED display, the encoder knob and a push button for each of the six configurable ports, the switch is intuitive to setup and the configuration is done in next to no time.
The grouping and the redundant fast backbone link make the XES-2T6 an ideal solution for interconnecting the stage with the FOH for instance.
As a layer 2 switch, the XES-2T6 is generally unaware of the application and therefore it works well with any protocol that operates on top of TCP/IP and with many Ethernet based protocols. However, special precautions have been taken to ensure that the XES-2T6 works perfectly with Art-Net, sACN and Dante. The Art-Net specification for example expects the controller to only send data every few seconds or when an update is available. A typical switch might put itself into sleep mode when no traffic is observed, not so the XES-2T6; it stays ready to forward data anytime without delay.
With the increased acceptance of TCP/IP and Ethernet based protocols, the proper operation of the network and its equipment has become critical for many shows. Therefore, it is crucial to professionally plan, configure and install the network for any show or venue. As a measure to further lower the chances of network outages, the XES-2T6 comes equipped with two separate switch mode PSUs that can be powered from two different mains supplies. -
-
-
Teltonika RUT950 Industrial cellular router
Mobile module 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps 3GPP Release Release 10/11 depending on the hardware version SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection…
-
TP-Link LS105G – Ethernet Switch, RJ45 Ports 5, 1Gbps, Unmanaged
Ethernet Switch Type: Unmanaged Mounting Type: Desktop Ports: 5 RJ45 Ports: 5 Network Speed: 1 Gbps Series: LS Operating Voltage Max. – DC: 5 V Operating Temperature Min.: 0 °C Operating Temperature Max.: 40 °C
-
-
Zyxel GS1900-48 V2 M RM
The ZyXEL GS1900 48-port GbE Smart Managed Switch with Gigabit speed and essential managing functions bring your business network more flexibility and connectivity. The GS1900-48HP is providing GbE switches with power saving functions, fanless design and full IPv6 support ensure your network to be ready for future expansions. In addition, the PoE models GS1900-48HP Gigabit…
