• Infinity Raccoon S420/4

    Infinity Raccoon S420/4

    Very powerful strobe/wash combination fixture with a beam angle of 110 degrees. It has ten individually controllable sections with 42 RGBW LEDs each that deliver wash effects of up to 30,400 lumens when combined. The white part of the RGBW LEDs has a CRI of 92, which is very high for a product of this type.
    The strobe effect is created by a row of 35 ultra-bright CW LEDs, each capable of strobing at 20 W for a total of 700 W of LED strobe power (over 70,000 lumens)! The strobe LEDs have a special lens to optimise the output angle. The LEDs are positioned in a line in the centre of the fixture in between the wash LEDs. They can be used in continuous output mode, but are tuned down to 12 W (over 54,200 lumens) in this mode for thermal reasons.
    The LEDs are soldered onto a black PCB, so the strobes are inconspicuous when switched off. The cooling fans can be set to a slow mode to keep them whisper quiet. With the optional L bracket, the IP65-rated housing can be mounted vertically or at an angle, while still being balanced (no torque force on the mount). Other optional accessories include a top hat, a barndoor and a range of diffusers.
    There are 3 pcs in the suitcase.

    Rohkem infot
  • Showtec Titan Strobe FLEX FX

    Showtec Titan Strobe FLEX FX

    he Showtec Titan Strobe FLEX FX is a set of 8 high-power LED strobes and a dedicated controller. Each individual pod has a powerful cold white 100-watt COB LED for strobing and a ring of 12 individually controllable 2-watt RGBW LEDs. The integrated RGBW LEDs allow you to create unique full-colour LED ring effects. The powerful LED light source combined with a strobe functionality allows you to use the Titan Strobe FLEX FX as a strobe light with bright colour effects. It uses a Fresnel lens to create the optimum beam angle. The light effect can be controlled via DMX/RDM, Art-Net, sACN and Master/Slave, but can also run in stand-alone mode with several built-in programs.
    The strobe pods have a special mounting bracket with 4 holes at a 45-degree angle, so you don’t have to detach the pod from it to drill through the holes to mount it. The bracket also has a 12.5 mm hole, while the controller has two 12.5 mm holes and an M10 threaded insert for attaching a clamp. You can also attach a quick lock bracket to the controller and pods. The pods and controller have a robust IP65-rated aluminium enclosure and are ready for outdoor shows. Dedicated 4x 2.5 m and 4x 5 m cables with control signals and power are included. Additional dedicated cables of various lengths are available separately (maximum length allowed: 30 m).

    Rohkem infot