• QSC MX3000 power amplifier

    QSC MX3000 power amplifier

    The MX 3000a is a high power, low profile professional power amplifier with advanced features and a flexible input. It delivers tremendous power in only three rack spaces, providing high level performance under the most demanding conditions.
    A stepped linear output circuit combines high power with high efficiency to provide greater average and dynamic audio performance, while
    reducing normal system cooling and AC requirements by greater than 50%. An automatic variable speed fan matches cooling capacity with heat requirements.
    The rear panel uses Level 1 of QSC’s exclusive Open Input Architecture™ which allows the use of optional input connectors, input transformers, cinema crossovers, power limiters, precision attenuators, and other signal processing cards as they become available.

    Rohkem infot
  • KV2 VHD2000 - System Control and Amplification

    KV2 VHD2000 – System Control and Amplification

    The VHD2000 is the control and amplification unit for the VHD2.0. It is a three-way, rack-mounted unit containing high frequency, mid frequency and mid-bass amplifiers. It also houses all processing and control electronics for the subwoofer system. Our own hybrid signal processing utilises the very best technology available from both the analogue and digital worlds, to offer complete audio system control, equalisation, overdrive protection, thermal protection and user adjustable set up parameters. Time alignment and phase correction is done via KV2’s new 20MHz digital delay line, boasting the highest sampling rate of any digital speaker processor available. Once the set-up process is completed, the VHD2000 manages all system functions and assures optimal performance.

    Rohkem infot
  • KV2 Audio EPAK2500

    KV2 Audio EPAK2500

    Control of Your ES System.
    The EPAK2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also controls the allocation of power depending on the number of bass modules employed. The EPAK2500 is enclosed in a road-rugged case with side handles and a built in cable storage compartment. Easily transported on a trolley this unique amplification system has its electronics mounted on an independent suspension system that isolates it from the shocks and impacts typically encountered on the road. A large aluminum heat sink provides passive cooling along with two demand-sensitive fans for added reliability.

    Rohkem infot