Kramer VP-200K

The VP−200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.

  •  High Bandwidth — 400MHz (–3dB).
  •  HDTV Compatible.
  •  ID Bit Control.
  •  Kr–isp® Advanced Sync Processing — Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr–isp® advanced sync processing can be enabled or disabled.
  •  EDID PassThru-Passes EDID signal from display to source via output 1.
  •  Selectable Sync Input Impedance — 75Ω (video), 510Ω (Graphics/TTL).
  •  DC Coupling.
  •  3ft 15–pin HD Cable Included.

Kogus *

Kategooria:

Kirjeldus

Interfaces
Inputs: 1 UXGA on an 15–pin HD connector
Outputs: 2 UXGA on 15–pin HD connectors
Max. output level: 2.2Vpp
Transmission
Bandwidth: (-3DB) 0.03%
Differential Gain: 0.05%
Differential Phase: 0.03Deg
K-Factor: <0.05%
Signal-to-Noise Ratio: 72dB @5MHz
Conrrols D Bit switch, analog/TTL switches for setting the sync
Coupling: DC
Power
Power Consumption: 5V DC, 130mA
General
Dimensions:12.00cm x 7.15cm x 2.44cm W, D, H
Weight: 0.2kg (0.4lbs) approx.

Seotud tooted